A 90° AN10 hose end for PTFE-lined braided hose. AN10 is where you go when volume matters more than packaging: main feeds on big-capacity or heavily boosted engines, dry-sump and remote oil cooler circuits, and generous return lines that must not build back-pressure. The right-angle body keeps a large, relatively stiff hose from having to fight its own bend radius as it leaves the port — a real consideration at this size, since a forced bend puts constant load on the fitting. PTFE-lined hose only; the ferrule works against the liner and cannot seal on rubber-lined braid. Cut square, flare the braid evenly, lubricate the insert, and tighten to seat. Support AN10 runs with P-clips so hose weight is not carried by the fitting.