A 45-degree banjo hose end for braided lines that have to turn hard as they leave the port. The sharper angle is the answer where a straight or 20-degree end would push the hose into a strut, upright or chassis rail. Hose thread is 3/8-32 UNEF and the banjo eye is 10.0mm, so confirm your bolt diameter rather than assuming the more common 10.2mm. Made from SUS303 stainless, which handles the brake dust, water and grit thrown at a hose end mounted at the wheel. Clock the fitting before final tightening so the hose sits in its natural path, then fit sealing washers on both sides of the eye and bleed the system thoroughly.